公司标志
会员等级
产品分类
联系方式
| 艾门(AMMEN)化学油墨有限公司 | |
| 联系人： | 李滔 业务 |
| 手机： | 13410303736 |
| 电话： | 0769-87777770/87506898 |
| 传真： | 0769-87777770 |
| Q Q ： | |
| Email： | ammenvhem@163.com |
| 地址： | 广东省东莞市凤岗镇官井头小布工业区 |
| 商铺： | http://ammenli.ccedwy.com/ |
您的位置：
丝印特印网 >>
艾门(AMMEN)化学油墨有限公司 >> 产品中心
产品中心
电镀面.UV面.金属.玻璃.油墨.
当前价格：详谈
产品数量：
有效期至：180天
更新时间：2014-08-30 17:01:05
产品数量：
有效期至：180天
更新时间：2014-08-30 17:01:05
其他详细信息
ALABINE CA series inks, which based on special mixed resins, are of multi-functional features and use widely. These series inks with good adhesion are scratch resistant, alcohol resistant, sterilization resistant and anti-static
ALABINE CA系列油墨采用了特种混合树脂，具有多功能特点，应用范围广。该产品附着力好，耐磨抗刮，耐酒精，耐蒸煮，防静电。
Ⅱ、Recommended Application (推荐应用)
◆ Recommended substrate: Harden PC, harden PMMA, the surface of UV coating, electroplating layer, stainless steel, stone, marble, glass, etc.
◆ Recommended for: Windows screens, the phone keypad, the phone shell, the metal products, the stone crafts, the glass products, etc.
◇ 适用基材：加硬PC，加硬PMMA，UV漆面，电镀面，不锈钢，石头，大理石，玻璃等
◇ 推荐用途：视窗屏，手机按键，手机壳，金属制品，石头工艺品，玻璃制品等
Ⅲ、Proposed Operation (操作建议)
Prepare: To clean the surface with ALATIVE SC5 treater （ALATIVE SC23 treater for the metal products and the glass products） and make sure non-dust, non-grease. To dilute the mixture with 3-20% ALATIVE SR6 thinner and then is ready（In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）. Mix the ink with the ALATIVE SA5 (10-15%, to total) activator completely (15-25% ALATIVE SA6 activator for the metal products and the glass products).
Mesh count: 70T to 180T
Drying: Air dry in 12-18 hours, or forced dry at 80 OC in about 40 minutes.
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.
印前：用ALATIVE SC5清洗印件表面（金属制品和玻璃制品，则用ALATIVE SC23），确定无尘、无油脂；用3-20%的ALATIVE SR8将产品稀释至需要稠度，即可印刷（调节油墨干燥速度，可以配合适量的ALATIVE RR6或ALATIVE SF3）；添加10-15%（对总量）ALATIVE SA5活化剂（金属制品和玻璃制品时，则用15-25%的ALATIVE SA6活化剂），与油墨充分混合，即可。
网纱：70T至180T
干燥：自然风干，12至18小时；或70OC烘干，约45分钟。
清洗：用ALATIVE SC6清除污点和不良印刷；用ALATIVE CC6清洗网板
ALABINE CA系列油墨采用了特种混合树脂，具有多功能特点，应用范围广。该产品附着力好，耐磨抗刮，耐酒精，耐蒸煮，防静电。
Ⅱ、Recommended Application (推荐应用)
◆ Recommended substrate: Harden PC, harden PMMA, the surface of UV coating, electroplating layer, stainless steel, stone, marble, glass, etc.
◆ Recommended for: Windows screens, the phone keypad, the phone shell, the metal products, the stone crafts, the glass products, etc.
◇ 适用基材：加硬PC，加硬PMMA，UV漆面，电镀面，不锈钢，石头，大理石，玻璃等
◇ 推荐用途：视窗屏，手机按键，手机壳，金属制品，石头工艺品，玻璃制品等
Ⅲ、Proposed Operation (操作建议)
Prepare: To clean the surface with ALATIVE SC5 treater （ALATIVE SC23 treater for the metal products and the glass products） and make sure non-dust, non-grease. To dilute the mixture with 3-20% ALATIVE SR6 thinner and then is ready（In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）. Mix the ink with the ALATIVE SA5 (10-15%, to total) activator completely (15-25% ALATIVE SA6 activator for the metal products and the glass products).
Mesh count: 70T to 180T
Drying: Air dry in 12-18 hours, or forced dry at 80 OC in about 40 minutes.
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.
印前：用ALATIVE SC5清洗印件表面（金属制品和玻璃制品，则用ALATIVE SC23），确定无尘、无油脂；用3-20%的ALATIVE SR8将产品稀释至需要稠度，即可印刷（调节油墨干燥速度，可以配合适量的ALATIVE RR6或ALATIVE SF3）；添加10-15%（对总量）ALATIVE SA5活化剂（金属制品和玻璃制品时，则用15-25%的ALATIVE SA6活化剂），与油墨充分混合，即可。
网纱：70T至180T
干燥：自然风干，12至18小时；或70OC烘干，约45分钟。
清洗：用ALATIVE SC6清除污点和不良印刷；用ALATIVE CC6清洗网板
本月访问：
总访问量：
