公司标志

会员等级
产品分类
联系方式
| 艾门(AMMEN)化学油墨有限公司 | |
| 联系人: | 李滔 业务 |
| 手机: | 13410303736 |
| 电话: | 0769-87777770/87506898 |
| 传真: | 0769-87777770 |
| Q Q : | |
| Email: | ammenvhem@163.com |
| 地址: | 广东省东莞市凤岗镇官井头小布工业区 |
| 商铺: | http://ammenli.ccedwy.com/ |
您的位置:
丝印特印网 >>
艾门(AMMEN)化学油墨有限公司 >> 产品中心
产品中心
耐强酸.强碱.抗氧化油墨

当前价格:详谈
产品数量:
有效期至:180天
更新时间:2014-08-30 16:59:39
产品数量:
有效期至:180天
更新时间:2014-08-30 16:59:39
其他详细信息
PLATIVE ISP3320, a kind of antioxidant insulating paint, is specialized applied to anodizing treatment. Strong acid resistance(Such as Hydrofluoric acid, Concentrated sulfuric acid). Good adhesion. Good Leveling
PLATIVE ISP3320是一种抗氧化绝缘保护漆,专门开发应用于阳极氧化处理过程的保护作用,耐强酸(如氢氟酸、浓硫酸等),附着力好,流平性好
Ⅱ、Operational Guidance
操作向导
First, to clean and dry the surface, no oil slicks, no dust. Second, to paint the surface where prevent from plating or pickling next (The corresponding additives can be used to dilute the product); painting by screen printing, pad printing, scratch, dipping, or spraying. Then 160-200OC heat cured in 20-30 minutes. To clean the coating with the corresponding removers after anodizing.
先清洁并干燥工件表面,确定无油污、无灰尘;再将阻镀漆涂于需保护位置(可用相应稀释至需要稠度) ;可丝印、移印、刮涂、浸涂、喷涂等;然后160至200摄氏度烘干,即可进行氧化加工;氧化处理后,请用相应清洁剂除去涂层。
Ⅲ、Annotation
附注
Considering the painting method, please dilute the product to appropriate viscosity before use; please use the corresponding thinners, or else it could lead to paint deterioration; during operation, please keep the environment ventilation to prevent inhalation.
产品使用前,根据施工方法,调至适当粘度;请采用相应稀释剂,否则可能导致油墨变质;施工时,请保持环境通风,防止吸入。
PLATIVE ISP3320是一种抗氧化绝缘保护漆,专门开发应用于阳极氧化处理过程的保护作用,耐强酸(如氢氟酸、浓硫酸等),附着力好,流平性好
Ⅱ、Operational Guidance
操作向导
First, to clean and dry the surface, no oil slicks, no dust. Second, to paint the surface where prevent from plating or pickling next (The corresponding additives can be used to dilute the product); painting by screen printing, pad printing, scratch, dipping, or spraying. Then 160-200OC heat cured in 20-30 minutes. To clean the coating with the corresponding removers after anodizing.
先清洁并干燥工件表面,确定无油污、无灰尘;再将阻镀漆涂于需保护位置(可用相应稀释至需要稠度) ;可丝印、移印、刮涂、浸涂、喷涂等;然后160至200摄氏度烘干,即可进行氧化加工;氧化处理后,请用相应清洁剂除去涂层。
Ⅲ、Annotation
附注
Considering the painting method, please dilute the product to appropriate viscosity before use; please use the corresponding thinners, or else it could lead to paint deterioration; during operation, please keep the environment ventilation to prevent inhalation.
产品使用前,根据施工方法,调至适当粘度;请采用相应稀释剂,否则可能导致油墨变质;施工时,请保持环境通风,防止吸入。
